Model 601 SBCM

Model 601 SBCM

OD Mount Slide Bearing Series (SB) Model 601SBCM – 603.5SBCM – 1.25″ TO 3″ (3.75 to 76.2mm)

The Heavy Duty SBCM Series of low profile clamshells are split-frame lathes that produce rapid, reliable severing and beveling of in-line tube and pipe. Smaller lathes have the ability to split in two for mounting on either side of in-line 1/8″ pipe to 3″ tube in order to perform precision severing and/or beveling. SBCM Series machines offer secure collet type clamping that not only provides self-centering, but also prevents distortion or damage from clamping forces with full support on Schedule 5-10 pipe or tube. SBCM’s can be configured for clean-room use (No Lead) and are protected by tough Nickel plating that makes them easy to clean and decontaminate. SBCM’s require short perch length for operation and are sized to cover a wide range of cutting applications. Bits can be specified to provide optimal cutting results on specific materials.

Description

OD Mount Slide Bearing Series (SB) Model 601SBCM – 603.5SBCM – 1.25″ TO 3″ (3.75 to 76.2mm)

The Heavy Duty SBCM Series of low profile clamshells are split-frame lathes that produce rapid, reliable severing and beveling of in-line tube and pipe. Smaller lathes have the ability to split in two for mounting on either side of in-line 1/8″ pipe to 3″ tube in order to perform precision severing and/or beveling. SBCM Series machines offer secure collet type clamping that not only provides self-centering, but also prevents distortion or damage from clamping forces with full support on Schedule 5-10 pipe or tube. SBCM’s can be configured for clean-room use (No Lead) and are protected by tough Nickel plating that makes them easy to clean and decontaminate. SBCM’s require short perch length for operation and are sized to cover a wide range of cutting applications. Bits can be specified to provide optimal cutting results on specific materials.

  • 601SBCM, 0.125” to 1” (10.3 to 33.4mm), max wall 0.250” (6.35mm)
  • Pneumatic
  • Precise in-line cutting
  • Compact design – Perfect for low-clearance operating spaces
  • Collet mounting – Secure and won’t deform thin wall pipe and tube
  • Flexible drive shaft – Bayonet mount
  • The perfect solution for field tie-ins
  • Tools contain no lead, brass or copper
  • Sever and bevel
  • Preparation on carbon steel, low alloy, chrome, chrome/molly, stainless, inconel, copper, aluminum and copper nickel
There are no products