2002

PFM Introduced To answer the growing global petroleum demand, Tri Tool introduces the PipeMASTER Pipeline Facing Machine. These tools set the industry standard, as one of the fastest, most powerful pipe facing machines on the marketing.

Read More

2001

Tri Tool Power Services To provide a conduit to perform union machining work under the jurisdiction of the UA via the National Specialty Agreement, Tri Tool Power Services is formed. Tri Tool Power Service instructors train union members on the operation of specialty pipe beveling tools.

Read More

2001

9/11 Relief Efforts After the terrorist attacks of 9/11, original equipment manufacturers (OEMs), fabricators and distributors responded with expertise and equipment to help in the cleanup efforts. Tri Tool answered the call by providing products like our OD mounted clamshells to sever tube and pipe.

Read More

1997

Rancho Seco Project Tri Tool is contracted to assist with the Rancho Seco Nuclear Power Plant decommissioning. Concerns were raised over the potentially toxic vapors associated with the thermal cutting of stainless steel tanks, tanks internally contaminated, and tanks painted with lead based paint.  Tri Tool was able to provide...

Read More

1997

Durabit Introduced The patented Durabit is introduced to meet the industry’s need for premium cutting bits.  The Durabit was engineered with superior material and coating technologies, expert heat treating, and use of premium base metals. This process ensured that the Durabit out cuts the competition.

Read More

1989

BEVELMASTER® Tools The new BevelMASTER tools were the next evolution of the ID Mounted tools They were designed to perform three function end preparations, accept their torque through the mandrels, and have integral drive motors set at right angles to the pipe.

Read More

1987

Ekofisk Platform Raised in the North Sea Norway’s Ekofisk oilfield was slowly sliding into the North Sea. Tri Tool and our 600 Series OD Mounted Clamshells were called upon to help with raising six huge platform decks, perched on steel legs driven into the sea floor, up approximately 6-1/2 meters.

Read More

1981

First Clamshell OD Mounting Lathe The introduction of these clamshells allowed for single step severing and beveling; the ability to eliminate heat affected zones (HAZ) from the cutting process. This revolutionary product allowed weld removal operations without pipe or component replacement, as well as eliminating problems in machining high chrome...

Read More

1980

First Tube End Squaring Tools Tri Tool introduces the first of a series of Tube End Squaring tools. These tools are designed primarily to meet requirements to prepare stainless steel tubing for autogenous automatic welding with a flat, square and burr-free end.

Read More

1974

Pipe Beveling Lathes – ID Mounted These three function end preparation lathes with integral pneumatic, electric or hydraulic motors incorporated such features as full cutting torque acceptance through the mandrel, auto feeds and specialty mounting mandrels such as Tri Tools patented miter mandrel.

Read More

1972

Tri Tool Established In 1972, Dr. George Wernette was one of three co-founders who responded to the challenges facing industries involved in preparing and welding pipe. Tri Tool first introduced advanced portable machine tool technology, in the form of pipe and tube cutting and squaring, to the nuclear construction industry,...

Read More

Categories

October 2019
S M T W T F S
« Sep    
 12345
6789101112
13141516171819
20212223242526
2728293031  

Our News Archive

There are no products