Tri Tool ID mount pipe beveling machine for boiler tubes

Model 201BA

Model 201BA – Narrow Design Beveling Machine

The lightweight, compact design and small diameter cutting heads of the Model 201BA BEVELMASTER permit rapid, accurate machining in tight spaces, making it perfect for boiler use. The OD mounting, (no mandrel) design clamps to the outside of tube or pipe allowing this machine to successfully work on boiler tubes with inside diameters under 1″ with less damage than mandrel mounting systems. The machine features rapid clamping saddle adjustments and a right angle feed knob, with all controls (feed, clamp, motor) on the outside of the tube panel opening for safe and easy operation. The narrow width, of only 1.45″ permits use on waterwall cutout windows and operate between boiler panels. The Model 201BA’s adjustable saddles cover the full cutting size range.

Categories: , , ,

Description

Model 201BA – Narrow Design Beveling Machine

The lightweight, compact design and small diameter cutting heads of the Model 201BA BEVELMASTER permit rapid, accurate machining in tight spaces, making it perfect for boiler use. The OD mounting, (no mandrel) design clamps to the outside of tube or pipe allowing this machine to successfully work on boiler tubes with inside diameters under 1″ with less damage than mandrel mounting systems. The machine features rapid clamping saddle adjustments and a right angle feed knob, with all controls (feed, clamp, motor) on the outside of the tube panel opening for safe and easy operation. The narrow width, of only 1.45″ permits use on waterwall cutout windows and operate between boiler panels. The Model 201BA’s adjustable saddles cover the full cutting size range.

  • 0.125” to 1.5″ (3.18 to 48.26mm) Pipe Range
  • Wall Thickness 0.40” (10.16mm)
  • Optional Cutting Heads, 1.45” (36.8mm), 2.0” (50.8mm)
  • 1.45” Thin Design for Tube Waterwall Access
  • Adjustable or Fixed Clamping
  • Pneumatic Motor (55 cfm (26L/s) at 90 psi (621 kPa) air supply)
  • Bevel, Face
  • Preparation on mild, chrome, stainless, copper-nickel alloy
  • Special procedures for: inconel, other high temp alloys
  • Weight 15 lbs (6.8 kg)

200 Series Accessories

Easy to set up and operate, our unique clamshell designs allow for optimal machining speed and feed rates. Below are some of the standard accessories available for these machines.

As an original equipment manufacturer, special options are available depending on your unique situation. Please ask your sales representative for items not listed below.

200 Series Accessories Chart

This information is provided as a guideline only to assist with the selection of equipment and accessories. This information is subject to change without notice. Contact your sales representative for specific details or technical specifications.

200 Series ID Mount Pipe Machining Equipment Catalog

200 Series ID Mount Pipe Machining Equipment Catalog

Download 2.86 MB 1408 downloads
There are no products